COVID-19: We are here to help you during this difficult period, you can pick up your order in store, or have it shipped to your home.

Elac Miracord 50 | Turntable with Built-In Phono Preamp

Special Price CA$659.99 Regular Price CA$849.00

Free delivery on orders over CA$99.00


Normally ships within 3-7 business days.


Elac Miracord 50 | Turntable with Built-in Phono Preamp

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme.
The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static-balanced, straight-tube tonearm with removable headshell features a factory-mounted Moving Magnet phono cartridge.
Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to any music system.
Out of stock
Only 0 left

Canada Free Delivery

Orders over CA$99.00

Elac Miracord 50 Technical Data

Drive System: Belt drive Motor: DC motor Selectable Speeds: 33⅓ and 45 rpm Motor Servo: Speed rotation and servo system Rotation Speed Variation: +/-1% Wow and Flutter: 1% Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted) Platter: Aluminum die-cast Platter Diameter: 12 in / 300 mm Tonearm Type: Aluminum tube, static-balanced Effective Arm Length: 8 in / 223.6 mm Stylus Pressure Range: 0 to 0 g Cartridge Weight Range: 5 to 6.0 g Effective Arm Mass: 4 g Overhang: 6 mm Offset Angle: 25 degrees Anti-Skating: Adjustment Supported Main Bearing: Stainless steel Cartridge Type: Audio-Technica AT91 moving magnet Stylus Construction: Bonded diamond Mount: Half-inch Frequency Response: 20 Hz to 20 kHz Channel Separation: >18 dB Channel Balance: 5 dB Vertical Tracking: Angle 20 degrees Stylus Pressure: 0 g +/-0.5 g Cartridge Weight: 0 g +/-0.5 g Headshell Weight: 0 g (including screws, nuts and wires) Phono Equalizing Amplifier Type :Moving magnet (MM) Phono Output: 5 mV (1 kHz, 3.54 cm/sec) Line Output: 140 mV (-17 dBV) Phono/Line: Switchable Supported Load Impedance: 47 kΩ Connector: RCA pin jack including RCA cable accessories Voltage: 100 to 240 V AC / 50 to 60 Hz Power Consumption: 1.5 W (less than 0.5 W at standby) Dimensions: (W X H X D) : 140 X 408 X 361 mm ( 5.5 x 16.05 x 14.20 inches ) Weight: 5.6 kg ( 12.10 lb )
More Information
length 51.56
width 43.18
height 21.08
color Matte White
Brands Elac